Rectangle Box Template

I Like To Have No Dotted Lines (Just Little Marks That Show You Where To Score.

This is my first time uploading a file, so i hope it works. Calculate the measurements for the sides in the same way. For a quarter fold sized card, i draw a touching row of four two inch cubes then add a 1/2 inch x 2 rectangle to one end [which will glue it into a cube after you have scored and bent the paper], and two 1/2 inch x 2 inch tabs to the bottom side of the middle two [squares 2 & 3}. For the lid, add 1/8 to your base size.

3 X Height Of Box + 2 X Finished Box Size.

Slip the box lid over the base and glue into place. You've seen the tutorial, now you. The template is meant to be printed out on cardstock, and the measurements are on the template, so you will have all you need. You can make the box any size you want.

Turning Both Tabs Toward The Outside Front Or Back Of The Box Will Help Ensure Straight Placement.

Not sure if i know how to do this, but here goes! Add this number to the length and width of the base. * 5 and 2/8 inches wide * 3 and 1/2 inches tall * 2 and 7/8 inches deep since i can't leave well enough alone, i modified it to be directly printable. Determine the height you want, and double it.

Step 6 Repeat Steps Four And Five On The Three Remaining Corners.

You want to have a 4 square box that is 3 high. Determine the size of your base. Use a bone folder to really make the diagonal folds sharp and easier to fold the sheet into a box. Apply adhesive to the end tabs of the 1”x4.75” strips, and adhere them to the inside of the opened box, aligning them with the top of the opening.